Living Room Staircases


ULTRA WPM 011 is a two part water proofing Membrane made with superior acrylic polymer with high synthetic micro fibers to make it a tough, durable & high strength, highly elastic, fast drying water proofing membrane hence there is no need for separate reinforcement, it is specifically designed for use under tiles, bricks & screeds. ULTRA WPM 011 is based on the most advanced acrylic polymer technology & it’s totally resistant to re-emulsification, flexible, low in odor & is fully compatible with polymer modified tile adhesives. It is based on rapid drying technology hence dries very fast & ready to tile in 18–24 hours @ 22 +/- 2°C.


ADVANTAGES Two component under tile water proofing
Advance acrylic - will not re- emulsify
Liquid reinforced - eliminates the need for reinforcing mat
Rapid drying & Wet area membranes
Meets class III category for AS4858
More then 350% elongation
Applications Swimming pools, Shower pans, stalls & tub surrounds
Bathrooms, Laundries, Spas & hot tubs
Industrial Commercial & Residential
Kitchens, Food Processing Areas & counter tops
Packaging Part A (10 kg & 20 kg) & Part B (10 Ltr & 20 Ltr)
Coverage 200 sq.ft for 2mm thickness (20 kg)
Mixing Propositions 1 : 1 PBW


Ultra WPA B2 is a two component acrylic modified elastomeric waterproofing which consists of specialty hard-wearing aggregates and liquid acrylic emulsion. It is a seamless, waterproof coating providing a tough and durable water tight coating which cannot be easily damaged or worn away. The coating is designed to re-face and even out variations in concrete and masonry surfaces. This is an easily brush able coating which can be simply applied by a stiff brush, or trowel to obtain the desired thickness. The polymer provides with exceptional adhesion, toughness and durability. Ultra WPA B2 effectively seals concrete masonry walls and bridges the shrinkage and cracks.


ADVANTAGES Simple brush or trowel application
Can be applied to rough or smooth surfaces
No joints continuous unbroken film
Nontoxic safe with drinking water
Durability & Abrasion resistant
For interior and exterior, wall and floor surfaces
Applications Basement | water tanks | Bridges | Lift Pits
Flat roofs | Terraces | Balconies
Concrete foundations | Parking decks
Bathrooms | Toilets | Sunken Portions
Podiums | Roof Gardens | Retaining walls | Pile heads
Packaging Part A (15 kg) & Part B (5 Ltr)
Colour GREY
Coverage 12
Mixing Propositions Part A to be mixed with part B diluted with approx. 2.5 -3 litre of clean water