ULTRA STONE PRIMER
ULTRA STONE PRIMER is a water based Primer designed as a barrier to prevent water, alkali (& other compounds) from reaching the substrate surface and to avoid efflorescence that can cause surface discoloration especially in cement substrates, stones and porous tiles. So the Primer acts as an excellent efflorescence resistant. ULTRA Stone Primer forms a strong cohesive film that also provide chemical barrier to the migrating alkali and other chemicals.
Specfications
DESCRIPTION | ULTRA EP 11 R |
---|---|
ADVANTAGES | Good adhesion strength Corrosion resistant Easy to apply Can be used for various application Surface hardener |
Applications | Metal & concrete surface |
Packaging | 5 Litre |
Colour | Brown |
Coverag | Approx. 25 sqm |
Mixing proportion | Part A 3.125kg & Part B 1.875kg |
ULTRA PRIME 11
ULTRA PRIME 11 is a liquid primer & it is a state-of-the crystalline waterproofing admixture also. The chemistry within the ULTRA PRIME 11 reacts with moisture and free lime in the concrete & capillary tracts & minor shrinkage cracks within the concrete. It should be diluted with water, to prepare internal surfaces to receive cement-based leveling compounds, screeds as well as plaster - based materials, improving adhesion & inhibiting penetration of water. It is used as a pore sealer on floor surfaces to prevent air bubbles rising through subsequently applied sub-floor smoothing &leveling compounds & to prolong their flow life and work ability.
Specfications
DESCRIPTION | ULTRA PRIME 11 |
---|---|
ADVANTAGES | Good adhesion to the porous surface Easy to apply Seals the substrates |
Applications | Water proofing & self leveling primer |
Packaging | 5 Litre |
Colour | White |
Mixing Proportions | ULTRA PRIME 11 diluted 1 : 3 by volume with water |
ULTRA EP 11
Ultra EP 11 is a two part solvent free epoxy primer for use with ULTRA GREEN polyurethane screeds and selfsmoothing epoxy floor coating, Blended with Fine Aggregate and use as a primer prior to applying thick applications of the Industrial Floor System, or other appropriate cement-based products. Where surfaces are very porous, more than one coat of primer may be required to achieve the desired bonding efficiency. For applications on new concrete or where the relative humidity (RH) of the substrate is in excess of 65%, good quality Damp Proof Membrane should be used. If the substrate is particularly smooth, the surface of the Ultra Prime 11 should be seeded with Fine Aggregate immediately after application to give a mechanical key to facilitate installation of resin screeds and toppings.
Specfications
DESCRIPTION | ULTRA EP 11 |
---|---|
ADVANTAGES | Two part solvent free epoxy primer Seals substrates and acts as an bonding bridge For Internal & External Use Easy to use |
Applications | Industry, Hospitals, Machine Rooms Hotels & Food Industry Swimming Pool Internal & External |
Packaging | 5 Litre |
Colour | Brown |
Coverage | Approx. 25 sqm |
Mixing proportion | Part A 3.125kg & Part B 1.875kg |
ULTRA EP 11 R
ULTRA EP 11 R is a low viscosity, solvent and benzyl alcohol free phenalkamine curing agent designed for epoxy coating applications protecting metal and concrete substrates. It has excellent rapid cure properties, even at low temperatures, offers very good chemical resistance, and provides excellent adhesion on wet or otherwise unprepared surfaces & green concrete. Heavy duty industrial, marine service, protective, floor, & potable water contact coatings can benefit from this product's outstanding water resistance & corrosion protection.
Specfications
DESCRIPTION | Ultra AM 30 |
---|---|
ADVANTAGES | Improved workability Increased strength Reduced porosity / more durable Higher cohesion Chloride free Low permeability & high early strength |
Applications | To pumpable concrete Concrete structure Floor concrete Interior & exterior concrete mix High grade concrete M30 |
Packaging | 5 Ltr, 20 Ltr & 200 Ltr drums |
Colour | Brown |
Dosage | 1 Ltr / 50 kg cement |
Mixing Proportions | 1:5/ Ltr. water Grout P.B.W |